Short answer: plan on roughly $5,000 to $12,000 for a typical residential plaster or quartz resurface in Irving, and more if you want pebble, glass bead, or full tile. Size, shell condition, and finish choice move the number more than any online “average” ever will.
Here is the part pool stores gloss over while you are staring at a rough, stained floor that feels like 80-grit sandpaper on your feet. Resurfacing is not a paint job. You are draining the pool, fixing what the water has been hiding, and installing a new interior finish that has to bond to concrete in the Las Colinas and mid-cities area heat. Do the prep right and you get another decade-plus. Skimp and you get a fancy peeling mess.
Pool resurfacing cost at a glance
| Finish | Typical residential range* | Lifespan (ballpark) | Best for |
|---|---|---|---|
| White / colored plaster | $5,000 – $9,000 | 10–15 years | Budget refresh |
| Quartz / polymer-fortified | $7,000 – $12,000 | 12–18 years | Stain resistance |
| Pebble / aggregate | $10,000 – $18,000 | 15–20+ years | Longevity + texture |
| Glass bead / premium aggregate | $14,000 – $25,000+ | 15–25 years | Look + feel |
| Tile (waterline or full) | Highly variable | 20+ years if set right | Design statement |
*Ranges assume a normal backyard inground pool roughly 12×24 to 16×32. Commercial and oversized freeforms go up. Always get a measured quote for your Irving pool.
If you only remember one line: you are paying for surface prep and shell integrity first, color second.
What actually drives the price in Irving
1. Square footage of the interior
More wall and floor = more material and labor. A small plunge pool and a full family rectangle are not the same job, even if both are “one pool.”
2. Condition of the existing finish
Light acid wash and a bonded coat is one budget. Full chip-out, crack repair, and re-plumb of returns is another. Hollow-sounding plaster and rust stains from rebar tell us we are not in coupon-job territory.
3. Finish system
Plaster is the entry ticket. Quartz fights stains better. Pebble lasts longer and hides a little more sin. Tile is beautiful and unforgiving if the substrate moves.
4. Access and site logistics
Tight side yards, HOA rules, and equipment that has to be staged from the street all add hours. Irving lots are not all the same.
5. Water and startup
Fill water, balance chemicals, and brush-down startup are part of a real job — not optional extras someone “forgot” to list.
Plaster vs pebble vs tile (the decision that matters)
Plaster is the classic smooth finish. It is the least expensive path back to a swim-ready pool. It also stains and etches faster if chemistry is ignored. If you treat water care like a hobby you abandon in July, budget for a shorter life.
Quartz / fortified plaster adds aggregate for stain resistance and a bit more toughness. For many Irving owners this is the sweet spot: better than basic plaster without pebble money.
Pebble / exposed aggregate costs more upfront and usually wins on longevity and slip feel. It hides minor unevenness better than white plaster’s “show every sin” look.
Tile is a design choice, not a coupon play. Waterline tile during a resurface is common. Full interior tile is a different class of project.
Honest take: if you plan to sell the house in three years, do not overbuy the finish. If this is the forever pool, pebble-class systems often cost less per year you own them.
Signs you actually need resurfacing (not just a shock treatment)
- Widespread roughness that snags skin and swimsuits
- Soft or hollow plaster when tapped
- Stains that return after every brush and acid wash
- Cracks that open with seasons
- Exposed aggregate or black spots that keep spreading
Green water alone is a chemistry or circulation problem. Do not resurface a pool because it went swampy once after a vacation — fix the equipment story first. Irving Pool Builders will tell you when not to resurface. That is the job.
How a proper resurface runs (so you know what “cheap” skipped)
- Inspect and drain — document cracks, delamination, and equipment condition.
- Prep — chip, grind, or bond-coat depending on the system. This is the boring expensive part.
- Repair shell and penetrations — beams, returns, lights, steps.
- Apply new finish — plaster, quartz, or pebble with the right cure window.
- Fill and startup — brush, balance, and hand off a care plan you can actually follow in TX sun.
If a bid is thousands under everyone else, ask what prep line item disappeared. Spoiler: it is usually prep.
DIY? Almost never for a full interior
You can DIY water chemistry. You should not DIY a full interior finish unless you enjoy owning a very expensive, very empty hole that fails inspection photos when you sell. Material science plus cure timing is not a weekend YouTube double feature. Hire it, watch the prep, pay for the warranty in writing.
What to ask on every Irving quote
- Is chip-out included or is this a bonded overlay only?
- Who handles crack repair and under what unit pricing?
- Exact finish product name and thickness
- Cure time before swim
- Written workmanship warranty length
- Startup responsibility (you vs crew)
Irving Pool Builders prices pool resurfacing in Irving with those line items visible. Call (844) 511-2320 if you want numbers on your shell, not a national blog average written for a different climate.
Two things worth folding into the same conversation. First, the interior is only empty once, so if you have been putting off new waterline tile, coping, or a spa spillover, doing it during a remodel while the pool is drained costs a fraction of doing it later. Second, whichever finish you pick, water chemistry decides how long it lasts — a plaster surface run below 7.2 pH for a couple of seasons etches early no matter who applied it, which is one of the quieter arguments for a weekly service plan.
Still deciding between finishes? Our plaster versus pebble breakdown covers the lifespan and cost tradeoffs side by side.
Bottom line
Pool resurfacing cost is a range, not a sticker. Most Irving homeowners land between $5k and $12k for a solid residential plaster/quartz job, more for pebble and design finishes. Pay for prep, pick a finish that matches how long you will own the house, and ignore any bid that treats grinding and crack repair like optional seasoning.
When the floor feels like a cheese grater and the stains have permanent residency, it is not a shopping-cart chemical problem anymore. It is a surface problem — and that is exactly what resurfacing is for.
Ready for a free quote in Irving?
Irving Pool Builders — free estimate, clear scope, no pressure. Use the form on this page or jump to the homepage quote.
Related services in Irving
Irving Pool Builders money pages — go straight to the service you need.
- Pool Remodeling & Renovation →
Pool remodeling is for the jobs that change the shape of the thing rather than just the color: an attached spa with a spillover, a tanning ledge cut into the shallow end, a deep end filled in because 1978 believed in diving boards. South Irving is full of pools poured in the 1970s that are structurally sound and stylistically frozen, and that's exactly the pool this page is about.
- Pool Resurfacing & Replastering →
Pool resurfacing is due when the floor stops feeling smooth and starts feeling like a driveway, and somebody climbs out of the shallow end with a scraped toe. That's the cream coat gone and the plaster body exposed to the water, and Irving's hard fill water isn't gentle with what happens next.
- Pool Leak Detection & Repair →
Pool leak detection starts with a bucket and 24 hours, and that part you can do yourself for nothing. In an Irving July a pool gives up about a quarter inch a day to evaporation and that's simply the climate, but half an inch a day is a leak and worth chasing quickly.
- Gunite & Shotcrete Pool Construction →
Gunite pool construction is how you get a pool in the exact shape your yard wants, instead of a shape somebody in a factory picked out a decade ago. Concrete gets shot through a hose against a tied steel cage, so the finished shell is monolithic: no panels, no seams, nowhere for water to find a way out.
- Fiberglass Pool Installation →
Fiberglass pool installation is the fast lane: a shell molded at a factory, trucked in, and set with a crane, so a straightforward job goes from bare dirt to swimming in two or three weeks. If your calendar is the constraint rather than your imagination, that's a strong argument and we'll make it for you.
Frequently asked questions
How much does pool resurfacing cost?
Most residential inground pools in Irving run about $5,000 to $12,000 for a standard plaster or quartz resurface. Pebble and tile finishes push higher — often $10,000 to $25,000+ depending on size and prep. A free on-site quote from Irving Pool Builders beats any online average.
How often should you resurface a pool?
Traditional plaster often lasts 10 to 15 years in a swim climate like the Las Colinas and mid-cities area. Pebble and aggregate finishes can go 15 to 20+ years. If you see widespread staining, roughness that tears suits, or hollow spots, it is time — not when a blog says so.
Can you resurface over old plaster?
Sometimes. Bonded overlays work when the old shell is sound. If plaster is delaminating or the shell has structural cracks, we chip back to solid material first. Skipping that step is how cheap resurfaces fail in two seasons.
How long does pool resurfacing take?
Most residential jobs in Irving are about 1 to 2 weeks from drain to swim, weather and cure time included. Rushing the cure is how you get dusting and early failure.
Local context
How this applies in Irving, TX
Every article here is written from pool work done in Irving and the Las Colinas and mid-cities area, so the numbers reflect local labour, permit and material costs rather than a national average. Your own job can land either side of them depending on access, the condition of what is already there, and the materials you pick — gunite and shotcrete shells, one-piece fiberglass pool shells, PebbleTec and polished quartz interiors.
The way to turn any of this into a real answer is to have someone look at your actual situation. The free estimate is free, itemized and written down, with no deposit and no obligation. Call (844) 511-2320 or start on the Irving Pool Builders homepage.
Areas Irving Pool Builders covers
Irving first, then the surrounding communities of the Las Colinas and mid-cities area. Each has its own page with local detail rather than a copy of this one:
- Coppell, TX — Dallas County, population 43,000
- Grapevine, TX — Tarrant County, population 51,000
- Southlake, TX — Tarrant County, population 31,000
- Colleyville, TX — Tarrant County, population 26,000
- Flower Mound, TX — Denton County, population 76,000
- Lewisville, TX — Denton County, population 112,000
Or jump to the full list of Irving services.
The Irving Pool Builders Team
Licensed pool pros in Irving, TX
Written by the Irving Pool Builders team — licensed, insured pool pros with 15+ years serving Irving, TX and the surrounding area.