Irving Pool Builders provides professional pool lighting & led retrofits in Irving, TX for residential and commercial properties across the Las Colinas and mid-cities area. Pool light replacement takes an afternoon and changes how the whole backyard reads after dark more than anything else you can spend the same money on. If your pool still runs a 500-watt incandescent, you own a device that costs real money to operate, eats bulbs every couple of seasons, and makes the water look faintly yellow, like a hotel corridor. A modern LED does more usable light on roughly 40 watts, lasts something like 30,000 hours, and will do color if you want it. Over ten years of four-hour evenings the electricity difference alone is worth the swap, and you stop draining the pool below the light every eighteen months to change a bulb. The retrofit itself is undramatic. Most LED fixtures are built to drop into a standard wet niche, so we pull the old one, feed the new cord back through the existing conduit, and it's done in an afternoon with nobody touching your deck. We leave enough cord coiled in the niche to lay the fixture on the deck for service, because that's what the code wants and because the next person to service it'll otherwise be cursing us by name. The more interesting option is nicheless LED. It needs only a small penetration through the shell, so we can add a second and third light to a pool that was built with one badly placed fixture staring straight at the deep end. Two modest lights beat one bright one every single time. What you actually want is even light in the water and a pool that glows, not a spotlight and a shadow. On a new build we place lights behind the seating and the tanning ledge so they light the water rather than the eyes of the people looking at it, and we run conduit for landscape and deck lighting in the same trench. A 12-volt transformer, a few well-aimed uplights into the crepe myrtles and a couple of step lights do more for the yard than a brighter pool light ever will. If you want color shows synced between pool and spa, stay inside one brand family, Pentair, Hayward or Jandy, or the two fixtures drift out of step and the pool looks like it's arguing with itself. We check the bonding grid and the GFCI while we're in there, because the pool light is the one place in the backyard where an electrical shortcut is genuinely dangerous, not just annoying. Any fixture that has taken water gets replaced, never dried out and reused. And the honest note: if your incandescent still works and you only ever swim in daylight, skip the retrofit. If you do go LED, don't pay extra for color you'll never use. A good white fixture costs less and throws a cleaner light.
With 15+ years of experience, our licensed and insured team brings the right materials and equipment to every job — gunite and shotcrete shells, one-piece fiberglass pool shells, PebbleTec and polished quartz interiors, glass mosaic and large-format porcelain tile, travertine coping and decking, variable-speed pumps — and backs the work with a written workmanship warranty. We serve Irving and nearby communities including Coppell, Grapevine, Southlake, Colleyville.
What We Handle
Everything our pool lighting & led retrofits in Irving covers
One crew, one point of contact, and the full range of pool lighting & led retrofits work in Irving, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- pool light replacement
- LED pool light retrofit
- color changing LED pool and spa lights
- nicheless LED lights
- fiber optic to LED conversion
- 12-volt low voltage lighting
- deck, tree and landscape lighting
- GFCI protection and equipotential bonding
- wet niche and conduit repair
- waterlogged pool light replacement
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Irving services.
Materials, equipment and how we do pool lighting & led retrofits
The difference between pool lighting & led retrofits that lasts and pool lighting & led retrofits that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with gunite and shotcrete shells, one-piece fiberglass pool shells, PebbleTec and polished quartz interiors, glass mosaic and large-format porcelain tile, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Irving job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of pool work in the Las Colinas and mid-cities area means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do pool lighting & led retrofits outside Irving
Irving Pool Builders covers Irving and the surrounding communities of the Las Colinas and mid-cities area. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Pool Lighting & LED Retrofits in Coppell, TX — Dallas County, population 43,000
- Pool Lighting & LED Retrofits in Grapevine, TX — Tarrant County, population 51,000
- Pool Lighting & LED Retrofits in Southlake, TX — Tarrant County, population 31,000
- Pool Lighting & LED Retrofits in Colleyville, TX — Tarrant County, population 26,000
- Pool Lighting & LED Retrofits in Flower Mound, TX — Denton County, population 76,000
- Pool Lighting & LED Retrofits in Lewisville, TX — Denton County, population 112,000
Start on the Irving Pool Builders homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Irving Chooses Irving Pool Builders
- ✓Over 15 years building and servicing pools across Irving, Las Colinas and the mid-cities
- ✓Gunite, shotcrete and fiberglass construction, plus full remodels on pools we did not build
- ✓Experienced with tight zero-lot-line access, conveyor spoil removal and long gunite hose runs
- ✓HOA architectural review packets prepared as part of the job, not billed as an extra
Every pool lighting & led retrofits project in Irving gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free pool lighting & led retrofits free estimate in Irving, or request a quote and we'll get right back to you.